Lets say your in a room full of Kitsi Stacks, and you suspect you might of accidentally paired with a stack not your own, there's an easy way to check which WiFi block you have paired with.
1. Click on the Quick Menu Icon in the bottom right.
2. Under the Hardware Block Menu, if you click on the WiFi Icon, this will trigger whichever WiFi Block you have connected to start flickering.
3. If by accident you have actually paired with another WiFi, there's a straightforward way to unpair these accidental Blocks. Insert your WiFi Block into the Workspace from the Hardware Block Menu. Click on the the WiFi Block Properties.
4. Click on Advanced Settings in the side panel. Then click on Unpair button to unpair the block from your computer.
Now that you have unpaired from this WiFi Block, you can begin the pairing process with your own WiFi Block. Just be careful this time to pair with the correct WiFi Block.