To start pairing, your WiFi or Bluetooth Block must be connected to the Power Station and LED Matrix Block. The LED Matrix Block will display a number.
1. Click on the Pair Block icon in the top menu
2. A popup should appear. Type in the two numbers which appear on your LED Matrix Block. Click Pair.
3. Click on the Quick Menu icon in the bottom right. If you have paired correctly, you should see your connected blocks visible under Hardware Blocks.
Congratulations, you have now paired the Blocks to your computer. Now you can start creating!
For more advanced users, if you have access to the blocks in an area with few other blocks, a quicker way of pairing the blocks might be to disable school mode through the Account Menu section. This will automatically open the pairing interface when a WiFi or Bluetooth Block is ready for pairing. However, this feature only works effectively in environments where there is one or a limited amount of blocks.